Hi guys,
recently i have configured the dot1x security feature on the cisco c3650x switches with IOS 15.2(1)E. But when I added voice vlan to the port, the ip phone can't register.
My switch port configuration as below:
interface GigabitEthernet0/47
switchport mode access
switchport voice vlan 60
switchport port-security maximum 2
switchport port-security
switchport port-security aging time 1
switchport port-security violation restrict
switchport port-security aging type inactivity
switchport port-security mac-address sticky
srr-queue bandwidth share 10 10 60 20
queue-set 2
priority-queue out
authentication event fail action authorize vlan 203
authentication event no-response action authorize vlan 203
authentication host-mode multi-host
authentication port-control auto
mls qos trust device cisco-phone
mls qos trust cos
macro description USER
dot1x pae authenticator
auto qos voip cisco-phone
spanning-tree portfast
spanning-tree bpduguard enable
service-policy input AutoQoS-Police-CiscoPhone
Guys, please advice is there any other feature shuld be activated on swith to resolve this issue? i done all configuration on guidance of cisco documents.
BR
Rashad
