EZVPN question

[mnewnam06]

Hi,

I have a C870 running 12.4(4)T2. I am using EZVPN on this router. My question is what does "Phase: 6" mean? Thanks

#sho crypto ipsec client ezvpn

Easy VPN Remote Phase: 6

Tunnel name : primary

Inside interface list: Vlan1

Outside interface: FastEthernet4

Current State: IPSEC_ACTIVE

Last Event: CONN_DOWN

DNS Primary: x.x.x.x

DNS Secondary: x.x.x.x

NBMS/WINS Primary: x.x.x.x

NBMS/WINS Secondary: x.x.x.x

Default Domain: customer.com

Save Password: Disallowed

Current EzVPN Peer: x.x.x.x

[Kamal Malhotra]

Hi,

The development in this technology has been in phases. Please check the following URLs.

http://www.cisco.com/en/US/customer/products/sw/iosswrel/ps1839/products_feature_guide09186a0080087dad.html

http://www.cisco.com/en/US/customer/products/sw/iosswrel/ps5012/products_feature_guide09186a00800a8565.html

http://www.cisco.com/en/US/customer/products/ps6350/products_configuration_guide_chapter09186a0080455b7d.html

HTH,

Please rate if it helps.

Regards,

Kamal

[mnewnam06]

Hi Kamal,

Thanks for the reply. I have found that you are essentially correct. This phase number refers to the ezvpn client feature set running on the router.

[Kamal Malhotra]

Hi,

You are most welcome :-)

Glad to know that I could provice you with the required information.

Please rate if it helpd.

Regards,

Kamal