cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
229
Views
0
Helpful
2
Replies

Group command on 2611

v22l12b750
Level 1
Level 1

Hi,

I'm trying to setup a VPN gateway on a 2611 running IOS 12.2(23) to be connected via Cisco VPN client 4.x. The problem I am having is that when I try to configure the group via the command:

crypto isakmp client configuration group nameofgroup

The IOS does not recognize this command. Should I be running a different version of the IOS? Any help would be appreciated.

Thanks.

Vito

2 Replies 2

thisisshanky
Level 11
Level 11

Vito,

Can you paset a sh version output ?

Sankar Nair
UC Solutions Architect
Pacific Northwest | CDW
CCIE Collaboration #17135 Emeritus

Here it is:

Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600-JK9S-M), Version 12.2(23), RELEASE SOFTWARE (fc2)

Copyright (c) 1986-2004 by cisco Systems, Inc.

Compiled Wed 28-Jan-04 17:48 by kellmill

Image text-base: 0x8000808C, data-base: 0x815C382C

ROM: System Bootstrap, Version 12.2(10r)1, RELEASE SOFTWARE (fc1)

Escher uptime is 5 days, 5 hours, 3 minutes

System returned to ROM by reload

System image file is "flash:c2600-jk9s-mz.122-23"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco 2611 (MPC860) processor (revision 0x202) with 61440K/4096K bytes of memory.

Processor board ID JAB0314068H (694036854)

M860 processor: part number 0, mask 49

Bridging software.

X.25 software, Version 3.0.0.

SuperLAT software (copyright 1990 by Meridian Technology Corp).

TN3270 Emulation software.

2 Ethernet/IEEE 802.3 interface(s)

1 Serial network interface(s)

32K bytes of non-volatile configuration memory.

16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102