Guys,
Following is the scenario:
EZVPN-SERVER----->3745(EZVPNCLIENT)-----RADIO LINK -----> HOST
80.x.x.x--->202.x.x.x/10.1.10.x---->10.73.1.0/24
A 3745 is connecting to a PIX 515 using IOS EzVPN client. The internal interface on 3745 have 10.1.10.x IP , and anothe facility is connected via Radio link to 3745 having IP addresses in 10.73.1.0/24
Now when i connect successfully to EzVPN Server , only 10.1.10.0/24 hosts/routers are able to reach the VPN subnet , while 10.73.1.0/24 never is able to use VPN.
All routing/revert routing is fine, have duoble checked --- seems like only connected subnet can use VPN Subnet
Configuration is following:
crypto ipsec client ezvpn ez
connect manual
group trgvpn key xxxx
local-address Serial0/3/0:1
mode client
peer x.x.x.x
xauth userid mode interactive
