IPS command

[kamal-learn]

hi guys

when dealing with modular policy on an appliance especialy at the stage where we are trying to configure IPS

[ ISP (inline/promiscuous..) (fail-open/fail-closed)]

is a modular-hardware (IPS CARD)is required or the IOS/PIX can do the job alone ?

thanks in advance

[gmarogi]

IPS CLI has the following command modes:

privileged EXEC?Entered when you log in to the CLI interface.

global configuration?Entered from privileged EXEC mode by typing configure terminal.

The command prompt is sensor# .

service mode configuration?Entered from global configuration mode by typing service service-name.

The command prompt is clock configuration , where sensor# show c is the first three characters of the service name.

multi-instance service mode?Entered from global configuration mode by typing service service-name log-instance-name.

The command prompt is sensor# where sensor# CONFigure is the first three characters of the log instance name. The only multi-instance services in the system are signature definition and event action rules.

This URL should help you:

http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_command_reference_chapter09186a00804a8284.html