Showing results for 
Search instead for 
Did you mean: 

Community Helping Community


Missing syslog entries


We have some ASA 5515-Xs running 8.6(1) code.  We have syslogging setup (config below) and it's logging a slew of data just fine at a pace of 3-5 messages/sec, however there are some syslog IDs that never get sent.  I have verified with tcpdump on the receiving syslog host that the specific messages we are looking for are never sent by the ASA.  I'm interested in messages from the DAP and VPN classes (among others), which are 713xxx and 734xxx.  In the ASDM console these messages show up just fine (sanitized):

5|Aug 09 2012|22:28:40|713130|||||Group = XXX, Username = YYY, IP = x.x.x.x, Received unsupported transaction mode attribute: 5

5|Aug 09 2012|22:28:40|713904|||||Group = XXX, Username = YYY, IP = x.x.x.x, IKE: Filter conflict: received filter-ID (filter name=no filter) along with an AV-PAIR dynamic ACL filter (filter name = DAP-ip-user-00CDA106).AV-PAIR dynamic filter will be applied.

6|Aug 09 2012|22:28:40|734001|||||DAP: User YYY, Addr x.x.x.x, Connection IPSec: The following DAP records were selected for this connection: UserFullAccess


However, these messages never show up in the syslog destination file (but a bunch of other expected stuff DOES).

This is the entirety of our logging config:

asa/act# show running-config | grep logg

logging enable

logging timestamp

logging buffer-size 16384

logging buffered critical

logging trap informational

logging asdm informational

logging facility 22

logging host inside

logging host inside


Are we up against a bug?  Is there something we need to enable?



Everyone's tags (3)

Missing syslog entries

This ended up being due to having multiple routes to the syslog server, one over the management interface (directly connected) and one via a static route.  Why different systems within the ASA would choose different routes is not clear, but removing the routing decision resolved the issue.

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here