cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2766
Views
0
Helpful
19
Replies

No translation group found for tcp src outside:

alexus
Level 1
Level 1

Hi

I can't seem to figure it out, I have VPN client, i'm able to "dialin" to my PIX 515E 7.2(2) w/ ASDM 5.2(2), yet I can't access anything on the network, I'm getting one of these famouse "No translation group found for tcp src outside:192.168.1.129/49175 dst inside:192.168.1.251/65535", no matter what I do...

can someone help me here please?

thanks

19 Replies 19

D:\Users\a1exus>netstat -rn

===========================================================================

Interface List

15 ...00 05 9a 3c 78 00 ...... Cisco Systems VPN Adapter

8 ...00 19 d1 e4 4b d0 ...... Intel(R) 82566DC Gigabit Platform LAN Connect

10 ...7a 79 05 6d 5c e3 ...... Hamachi Network Interface

1 ........................... Software Loopback Interface 1

23 ...00 00 00 00 00 00 00 e0 isatap.{80D152C1-EF16-4DEB-A624-81201E1AA5DD}

9 ...02 00 54 55 4e 01 ...... Teredo Tunneling Pseudo-Interface

24 ...00 00 00 00 00 00 00 e0 6TO4 Adapter

22 ...00 00 00 00 00 00 00 e0 isatap.WRVS4400N

29 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3

===========================================================================

IPv4 Route Table

===========================================================================

Active Routes:

Network Destination Netmask Gateway Interface Metric

0.0.0.0 0.0.0.0 172.31.255.242 172.31.255.241 266

10.10.10.1 255.255.255.255 On-link 10.10.10.10 100

38.99.194.174 255.255.255.255 10.10.10.1 10.10.10.10 100

127.0.0.0 255.0.0.0 On-link 127.0.0.1 306

127.0.0.1 255.255.255.255 On-link 127.0.0.1 306

127.255.255.255 255.255.255.255 On-link 127.0.0.1 306

172.31.255.240 255.255.255.240 On-link 172.31.255.241 266

172.31.255.241 255.255.255.255 On-link 172.31.255.241 266

172.31.255.255 255.255.255.255 On-link 172.31.255.241 266

224.0.0.0 240.0.0.0 On-link 127.0.0.1 306

224.0.0.0 240.0.0.0 On-link 5.109.92.227 9256

224.0.0.0 240.0.0.0 On-link 10.10.10.10 266

224.0.0.0 240.0.0.0 On-link 172.31.255.241 266

255.255.255.255 255.255.255.255 On-link 127.0.0.1 306

255.255.255.255 255.255.255.255 On-link 5.109.92.227 9256

255.255.255.255 255.255.255.255 On-link 10.10.10.10 266

255.255.255.255 255.255.255.255 On-link 172.31.255.241 266

===========================================================================

Persistent Routes:

Network Address Netmask Gateway Address Metric

0.0.0.0 0.0.0.0 5.0.0.1 Default

0.0.0.0 0.0.0.0 172.31.255.242 Default

===========================================================================

IPv6 Route Table

===========================================================================

Active Routes:

If Metric Network Destination Gateway

24 1125 ::/0 2002:c058:6301::c058:6301

1 306 ::1/128 On-link

9 18 2001::/32 On-link

9 266 2001:0:4137:9e66:27:325f:53e0:e/128

On-link

24 1025 2002::/16 On-link

24 281 2002:56d:5ce3::56d:5ce3/128

On-link

8 266 fe80::/64 On-link

9 266 fe80::/64 On-link

22 266 fe80::5efe:10.10.10.10/128

On-link

29 266 fe80::5efe:172.31.255.241/128

On-link

9 266 fe80::27:325f:53e0:e/128 On-link

23 281 fe80::200:5efe:5.109.92.227/128

On-link

8 266 fe80::9170:2be2:270c:d7f6/128

On-link

1 306 ff00::/8 On-link

9 266 ff00::/8 On-link

8 266 ff00::/8 On-link

15 266 ff00::/8 On-link

===========================================================================

Persistent Routes:

None

D:\Users\a1exus>

You dont have the following line in your current config, please add it

group-policy tgn attributes

split-tunnel-network-list value tgn_splitTunnelAcl

that seems to do the trick:)

thank you so much!

how 'bout windows authentication now?

You are welcome dmitry. May I ask you to start a new conversation for Windows auth and finalize this question by rating+choosing the "resolved my issue" post?

Regards

ofcourse

thanks again,

it was very helpful