06-19-2011 08:51 AM - edited 03-09-2019 11:34 PM
Hi, I'm starting to train for my certification and have being following any posible explanation on how to configure ssh for a cisco 871w router, and there's no way I can connect. I've used TeraTerm Version 3.13 and 4.69 and it keeps asking me for the password wich I'm entering correct.
This is really frustrating since everywhere i look for answers i noticed that it should be something simple to do and still is not working for me.
Anyway this is my runing config if someone can give me a hand I'd really appreciate it
Current configuration : 1317 bytes
!
version 12.4
service config
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname labrouter
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$AnLl$H5XfrfdN5L6bogmtdGW.Y1
!
no aaa new-model
!
!
dot11 syslog
ip cef
!
!
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
ip domain name house.com
!
!
!
username tripi22 password 0 ld30dzy7
!
!
archive
log config
hidekeys
!
!
ip ssh version 2
!
!
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface FastEthernet4
ip address dhcp
duplex auto
speed auto
!
interface Dot11Radio0
no ip address
shutdown
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0
54.0
station-role root
!
interface Vlan1
ip address 192.168.1.1 255.255.255.0
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
!
!
!
control-plane
!
banner motd ^C
******************************************************************************
NO JODER
******************************************************************************^C
!
line con 0
password 123
login
no modem enable
line aux 0
line vty 0 4
password 123
login
transport input telnet ssh
!
scheduler max-task-time 5000
end
Current configuration : 1317 bytes
!
version 12.4
service config
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname labrouter
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$AnLl$H5XfrfdN5L6bogmtdGW.Y1
!
no aaa new-model
!
!
dot11 syslog
ip cef
!
!
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
ip domain name house.com
!
!
!
username tripi22 password 0 ld30dzy7
!
!
archive
log config
hidekeys
!
!
ip ssh version 2
!
!
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface FastEthernet4
ip address dhcp
duplex auto
speed auto
!
interface Dot11Radio0
no ip address
shutdown
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0
54.0
station-role root
!
interface Vlan1
ip address 192.168.1.1 255.255.255.0
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
!
!
!
control-plane
!
banner motd ^C
******************************************************************************
NO JODER
******************************************************************************^C
!
line con 0
password 123
login
no modem enable
line aux 0
line vty 0 4
password 123
login
transport input telnet ssh
!
scheduler max-task-time 5000
end
Solved! Go to Solution.
06-19-2011 06:38 PM
Hi,
Can you try changing the command "login" to "login local" under the vty lines?
Thanks,
Wen
06-19-2011 11:59 AM
Ariel: What password are you trying to login into it?
Regards,
Jatin
06-19-2011 12:02 PM
i'm tryig to login to user tripi22 password ld30dzy7
I even tryied with secure crt and same error authentication failed.
This is driving me crazy
06-19-2011 06:38 PM
Hi,
Can you try changing the command "login" to "login local" under the vty lines?
Thanks,
Wen
06-19-2011 06:49 PM
that's exactly what it was, thanks a lot and forgive mi ignorance
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide