"IKE QM Initiator FSM error history" Error message 3060 concentrator logs

[rburnett3449]

Need help! I get the following error message on the 3060 VPN concentrator after completing phase 1:

23959 01/25/2005 19:15:27.230 SEV=4 IKEDBG/65 RPT=58507 209.244.168.246

Group [209.244.168.246]

IKE QM Initiator FSM error history (struct &0x80c26ac)

<state>, <event>:

QM_DONE, EV_ERROR

QM_WAIT_MSG2, EV_TIMEOUT

QM_WAIT_MSG2, NullEvent

QM_SND_MSG1, EV_SND_MSG

23965 01/25/2005 19:15:27.230 SEV=9 IKEDBG/0 RPT=8036 209.244.168.246

Group [209.244.168.246]

constructing blank hash

23967 01/25/2005 19:15:27.230 SEV=9 IKEDBG/0 RPT=8038 209.244.168.246

Group [209.244.168.246]

constructing qm hash

23968 01/25/2005 19:15:27.230 SEV=8 IKEDBG/0 RPT=8039 209.244.168.246

SENDING Message (msgid=be448c0c) with payloads :

HDR + HASH (8) + DELETE (12)

total length : 64

23970 01/25/2005 19:15:27.230 SEV=7 IKEDBG/9 RPT=27787 209.244.168.246

Group [209.244.168.246]

IKE Deleting SA: Remote Proxy 192.168.81.0, Local Proxy 10.0.0.0

[jsivulka]

One possibility is that the conc is overloaded. Check the memory and CPU utilization and see if they are within limits. Also check if the configs are ok and that the SAs match.