PPP Multilink & using multiple virtual templates

[patrick.tuttle]

Hi,

We currently have a mlppp bundle with 4 serial member interfaces connecting to a remote site. Is it possible to have the same host router have a seperate mlppp bundle with 4 serial interfaces for a seperate remote site. We are using a Cisco 3800 router.

We are using a virtual-template setup.

Can more than 1 virtual template be configured on the same router.

We are doing this config without the IPX

http://www.summa4.com/warp/public/793/access_dial/mpp_serial.html

Any suggestions would be great.

thanks

-pat

[devang_etcom]

yes you can have the multiple MLPPP bundle on same router.

[patrick.tuttle]

Thanks for your reply. Have you done it with the virtual templates? as in the example?

Except times 2.

I only ask this because it seems to me there is a problem with the virtual access interfaces correclty attaching to the correct virtual template. But I cannot find where I read this.

I cannot lab this up until a couple of weeks and was hoping that someone has done it this way.

thanks

-pat

[patrick.tuttle]

I sucessfully was able to lab this up today.