Hi All
In my environment, I am using two switches cisco 2960 x series switch and ws-c3560 switch in my environment. I integrated the cisco 2960x switch with my AD through radius authentication and It is working fine.
But when I am trying to configure aaa (with the same configuration) on ws c3560-8pcs switch, It is not supporting radius-server host ..... commands after enabling the aaa new-model.
I have seen many documents for the same but did not get the solution yet. How can I integrate my ws-c3560 switch with AD.
for your reference I am sharing the exact model and IOS version of my ws-c3560 switch. If possible please share your view:
radius server IP: 172.16.16.32
PID: WS-C3560CX-8PC-S
IOS version: c3560cx-universalk9-mz.152-4.E2.bin
aaa new-model
aaa authentication login default group radius local
aaa authorization exec default group radius local
radius-server host 172.16.16.32 auth-port 1812 acc-port 1813
radius-server key cisco@123
ip domain-name abc.com
crypto key generate rsa module 2048
ip ssh ver 2
username cisco priviliage 15 password cisco
the above commands I configured on cisco 2960x switch. And It is working fine. I created the user on my radius server, through that user I am able to login on my Cisco 2960 switch.
But when I am trying to configure the same configuration on my ws-c3560 switch. It is taking only
aaa new-model
aaa authentication login default group radius local
aaa authorization exec default group radius local
but when I am trying to define the IP of my radius server it is showing unrecognized command
radius-server host ?
==unrecognized command===
Please help me If possible please share the commands how can I configure the same. (already shared the radius server ip, auth-port and acc-port)
Thanks in advance and hope for quick response.
Regards
Ashish
