cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
594
Views
2
Helpful
10
Replies

ASA performance test using iperf3 - NAT problem

I tested the ASA 5520 iperf3 to check its performance. I then wanted to add NAT to it to find out how much it was taxing the device. However, I kept having the problem that almost all traffic was untranslated.
krzysztofmaciejewskiit_0-1725982052479.png

The created objects are the same, i.e. 192.168.0.0/24, because the server address is 192.168.60.13 and the client address is 192.168.1.2. 
How should I configure NAT on the ASA to test the impact of NAT?

1 Accepted Solution

Accepted Solutions