cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

159
Views
0
Helpful
1
Replies
Highlighted

ASR1004 IOSd Memory allocation problem

Hello All,

 

As per Cisco documentation: https://goo.gl/wKDdBp

 

"The memory that is split between IOSd and the rest of the system is fixed at startup and cannot be modified. For a 4-GB system, IOSd is allocated approximately 2 GB, and for a 8-GB system, the IOSd is allocated approximately 4 GB (with software redundancy disabled)."

 

I have an ASR1004 with 8GB of RAM however the router only allocates 1.5G to the IOSd? And the SW redundancy is disabled!

 

cisco ASR1004 (RP2) processor (revision RP2) with 1486307K/6147K bytes of memory.
8388608K bytes of physical memory.

 

er2.blu.531.269#show running-config | sec redundancy

redundancy
 mode none

er2.blu.531.269#show platform software status control-processor brief
Load Average
 Slot  Status  1-Min  5-Min 15-Min
  RP0 Healthy   0.00   0.00   0.00
 ESP0 Healthy   0.00   0.00   0.00
 SIP0 Healthy   0.00   0.00   0.00

Memory (kB)
 Slot  Status    Total     Used (Pct)     Free (Pct) Committed (Pct)
  RP0 Healthy  8097480  4501624 (56%)  3595856 (44%)   3243328 (40%)
 ESP0 Healthy  8097460  1394608 (17%)  6702852 (83%)   1140776 (14%)
 SIP0 Healthy   969060   393352 (41%)   575708 (59%)    663936 (69%)

Mem:   8097480k total,  4501328k used,  3596152k free,   243248k buffers

 

Is it familiar to anybody here?

 

MP

Everyone's tags (3)
1 REPLY 1
Highlighted

Re: ASR1004 IOSd Memory allocation problem

Am I facing a corner case?