cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
291
Views
0
Helpful
2
Replies

Cannot use Class map policy on atm interface

cegomez75
Beginner
Beginner

( Ocultar detalles )

Tarea personal8/02/12

Notas:

Dear friends

can anyone help with this issue

i´ve tried to configure class map policy on a atm interface, as follow:

class-map match-all 256K-Monitoreo

match access-group 101

!

!

policy-map Restricion

class 256K-Monitor

bandwidth 256000

And then on a subinterface:

interface ATM0/1/0.1 point-to-point

bandwidth 512

ip address 10.130.128.235 255.255.255.248

no ip proxy-arp

ip accounting output-packets

ip virtual-reassembly

ip ospf network non-broadcast

ip ospf mtu-ignore

atm route-bridged ip

bridge-group 1

pvc 0/46

protocol ip 10.130.128.234 broadcast

encapsulation aal5snap

service-policy output Restricion

The problem is when i do a show running command the line service-policy output Restricion does not appear. When i introduce the command it doesn´t give any error.

Hope some ideas to rosolve this

Thanks

Carlos

2 Replies 2

Vivek Ganapathi
Enthusiast
Enthusiast

Hello Carlos,

What is the model of cisco box you have? Also provide me the IOS version.

Thanks

Vivek

Hi Vivek!!

Here is the info you ask for:

Cisco 2811

System image file is "flash:c2800nm-advsecurityk9-mz.124-15.T10.bin

Thank you for your help

Carlos G.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers