I don't know the first thing about the WAN something like POS...
Now I'm facing some problem with connecting OC48(POS) between ASR9K and ASR1K.
There are new 9K and new 1K in same server rack for the test.
So i tried to test these for connecting OC48
9K and 1K is directly connected by OC48
9K : A9K-SIP-700 // SPA-2XOC48POS/RPR // SFP-OC48-SR
1K : ASR1000-SIP10 // SPA-1XOC48-POS // SFP-OC48-SR
After connecting these two devices directly, ASR1K shows the interface status is up/up
but ASR9K ... the interface status is down/down.
I didn't configure anything. Do i need to configure something ?
When i connected POS port 1 and POS port 2 directly in the same ASR 9K chassis, the interface is up/up
please help me out
Thank you in advance. :)
Sorry I can't understand what you mean.
I just connected
There's no device between ASR9K and ASR1K.
exactly, so the transmit side of the 9k needs to be connected to the receive side of the 1k.
the transmit side of the 1k needs to be connected to the receive side of the 9k.
download this doc for reference:
Another link discussing the type of testing you are attempting: