Status : Last write failed because of a protocol error.
Delay : 120 seconds
Timeout : 300 seconds
Failures : 30
I cannot figure out what is the reason for this. But I can assure my ftp server working fine and the ftpuser can write data to the particular directory. I have tow interfaces in my router. Because of this I need to provide souce interface as my LAN IP. How can define it during this command. For a example in syslog messages i defined the "logging source fa 0/0" command.
your responses are higly welcome in order to solve this.
Listen: https://smarturl.it/CCRS8E37Follow us: twitter.com/ciscochampionSometimes, situations require temporary fixes. Sometimes, the network becomes an afterthought in overall office design and planning. In either situation, it may require netw...
In this special edition of the Insider Series, we hear from Cisco partners who have taken steps to be more eco-friendly and sustainable. We hear what inspires ASHRAE, Southwire, Igor, and NTT to create a workplace that is centered around people and how th...
We know that the Type-1 LSA describes the link type connected to the router, the neighbor router and the subnet number.In this topology, assume we dont have a Type-2 LSA, so each router will create its own Type-1 LSA, the Type-1 LSA will describe the neig...
Here are some commonly asked questions and answers to help with your adoption of Cisco DNA Center Wireless. Subscribe to this post to stay up-to-date with the latest Q&A and recommended Ask the Experts (ATXs) sessions to attend.
Q. I have a Cisco Appl...
Why IETF changed and inverted OSPF Type-7 LSA VS Type-5 LSA election In RFC 3101 compared to OLD RFC 1587?Many people learns that the Type-7 LSA and Type-5 election (ON Versus OE routes) depends on RFC 3101 for NSSA published in 2003 and RFC 1587 for NSSA...