I am using HSRP with in R1 and R2, where R1 is active and connected to 5 MPLS serial link and configured as1 Multilink for MPLS and R2 is connected to 4 point to point serial link. My all data should go through MPLS first and when MPLS goes down data shoud go through R2 point to point link.
Here I want to know that can I use (In R1 HSRP configuration) Track command standby 20 trackMultilink1 for multilink like we use in single link
(Ex- standby 1 track serial 0) so if my R1 multilink goes down R2 will become active and data can go through R2 link
-----------------------------------------------------------------Configuration of R1---------------------------------------------------
interface Multilink1
description < Multilink >
bandwidth 10240
ip address 10.20.128.1 255.255.255.252
ip accounting output-packets
ip flow ingress
ppp multilink
ppp multilink links maximum 5
ppp multilink links minimum 1
ppp multilink group 1
!
!
interface GigabitEthernet0/0
description <<connectivity to core switch>>
ip address 172.25.250.34 255.255.255.240
ip nat inside
no ip virtual-reassembly
duplex full
speed 100
standby 20 ip 172.25.250.33
standby 20 priority 120
standby 20 preempt
interface Serial0/0/0
description < MPLS Link >
bandwidth 2048
no ip address
encapsulation ppp
ppp multilink
ppp multilink group 1
no fair-queue
!
!
interface Serial0/1/0
description < MPLS Link >
bandwidth 2048
no ip address
encapsulation ppp
ppp multilink
ppp multilink group 1
no fair-queue
!
!
interface Serial0/1/1
description < MPLS Link >
bandwidth 2048
no ip address
encapsulation ppp
ppp multilink
ppp multilink group 1
no fair-queue
!
!
interface Serial0/2/0
description < MPLS Link >
bandwidth 2048
no ip address
encapsulation ppp
ppp multilink
ppp multilink group 1
no fair-queue
!
!
interface Serial0/2/1
description <MPLS Link>
bandwidth 2048
no ip address
encapsulation ppp
ppp multilink
ppp multilink group 1
no fair-queue
!
ip route 0.0.0.0 0.0.0.0 10.20.128.2
___________________________Configuration of R2---------------------------------------------------
interface Multilink1
bandwidth 8192
ip address 172.25.1.237 255.255.255.252
ip flow ingress
ppp multilink
ppp multilink group 1
!
!
interface GigabitEthernet0/0
ip address 172.25.250.35 255.255.255.240
shutdown
duplex full
speed 100
standby 20 ip 172.25.250.33
standby 20 priority 110
standby 20 preempt
!
!
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
!
interface GigabitEthernet0/2
no ip address
shutdown
duplex full
speed 100
!
!
interface Serial0/0/0
bandwidth 2048
no ip address
encapsulation ppp
ppp multilink
ppp multilink group 1
no fair-queue
!
!
interface Serial0/1/0
bandwidth 2048
no ip address
encapsulation ppp
ppp multilink
ppp multilink group 1
no fair-queue
!
!
interface Serial0/2/0
bandwidth 2048
no ip address
encapsulation ppp
ppp multilink
ppp multilink group 1
no fair-queue
!
!
interface Serial0/2/1
bandwidth 2048
no ip address
encapsulation ppp
ppp multilink
ppp multilink group 1
no fair-queue
!
!
interface BRI0/3/0
no ip address
encapsulation hdlc
shutdown
!
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
ip route 0.0.0.0 0.0.0.0 172.25.1.238
!
