IOS-XE missing object-group network command?

[campbech1]

I'm in the process of installing four Cisco 4451-X routers and see that the object-group network command is missing?! There is an object-group security but no network.

Will this be coming back or am I missing something?

[Steve Wood]

Did you get any resolution to this problem as I have the same issue

[campbech1]

Nothing at all. No one seems to have an answer. I'm going to call my Cisco SE later today.

[Steve Wood]

Yep I am going to raise with our distributor

[Stefan Giera]

Hello, 

I am having the same problem with IOS asr1001-universalk9.03.09.01.S.153-2.S1.bin, but I could figure out on another ASR1001 that the command is available in this very old IOS-Version: asr1001-universalk9.03.06.00.S.152-2.S.bin

So anyway - can You confirm that the "object-group network" command ist available on Version 03.12.01.S ? 

Thanks, 

Stefan

[InayathUlla Sharieff]

Stefan,

This cmd is again availabe from ;

Release 4.3.1

object-group network

To configure a network object group, and to enter the network object group configuration mode, use theobject-group network command in the global configuration mode. To de-configure the network object group, use the no form of this command.

object-group network { ipv4 | ipv6 } object-group-name

no object-group network { ipv4 | ipv6 } object-group-name

Syntax Description

ipv4	Configures the operation state of an IPV4 network object group.
ipv6	Configures the operation state of an IPV6 network object group.
object-group-name	Name of the object-group.

Command Default

None

Command Modes

Global configuration

Command History

Release	Modification
Release 4.3.1	This command was introduced. HTH

[Akzhol Konurbaev]

How to Solve a Problem? 

Please help. 

[campbech1]

I'm late to update this post but it looks like the command is back in Cisco IOS XE Software, Version 03.12.01.S - Standard Support Release.

object-group network SRS_Internal
 host 10.138.244.11
 host 10.138.244.12

[Akzhol Konurbaev]

Thank's  for your reply campbech1 !

But my version: 

Cisco IOS XE Software, Version 03.10.02.S - Extended Support Release

Cisco IOS Software, ISR4400 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.3(3)S2, RELEASE SOFTWARE (fc3)

What's wrong??? 

[campbech1]

I don't believe it was supported until version 3.12 and you're on 3.10 currently. You'll need to complete a software upgrade.

[Akzhol Konurbaev]

Believe me. 

<<You'll need to complete a software upgrade.>>

Ok, I will try.