08-01-2008 01:17 PM - edited 03-04-2019 03:12 AM
on my home 2651 I have IPv6 running but just out of curiosity I tried telneting to one of my home router's IPv6 addresses and it worked
but I have acls limiting telnet to 10.0.0.0/24 so ho do I make an acl for ipv6?
Solved! Go to Solution.
08-01-2008 02:52 PM
Hi, You have to create an IPv6 ACL and apply it to the VTY.
Here is the documentation for IOS version 12.4:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-sec_trfltr_fw.html#wp1058601
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-sec_trfltr_fw.html#wp1115947
HTH,
jerry
08-01-2008 02:52 PM
Hi, You have to create an IPv6 ACL and apply it to the VTY.
Here is the documentation for IOS version 12.4:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-sec_trfltr_fw.html#wp1058601
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-sec_trfltr_fw.html#wp1115947
HTH,
jerry
08-02-2008 03:57 AM
thanks that did it
08-03-2008 07:16 PM
thanks all
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide