12-02-2010 10:19 PM - edited 03-04-2019 10:40 AM
hi guys i have configured ipv6 in my packet tracer 5.3.
But i'm not able to ping between the configured routers
12-02-2010 11:59 PM
Hello,
Can you be a litle bit more specific.
Are you PINGING in IOS ?
ping ipv6 ipv6-address [data hex-data-pattern | repeat repeat-count | size datagram-size | source [async | bvi | ctunnel | dialer | ethernet | fastEthernet |gigabitEthernet | loopback | mfr | multilink | null | port-channel | tunnel | virtual-template | source-address | xtagatm] | timeout seconds | verbose]
Or on your PC or MAC TERMINAL ?
PING6
What is your IOS version ?
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-roadmap.html
http://www.cisco.com/en/US/docs/ios/ipv6/command/reference/ipv6_10.html#wp2541862
http://ipv6int.net/systems/cisco_ios_router-ipv6.html
I hope this information will help you , and helped me
Best Regards,
Didier.
12-03-2010 05:37 PM
Hello,
Actually my packet tracer which 5.3v supports configuration of IPv6, but does not support when i use the command to ping.
Ping shows only ipv4 option not ipv6 option.
12-03-2010 05:39 PM
Actually the command ping ipv6 is not supported in packet tracer v5.3
but it also to configure ipv6 configurations
12-03-2010 02:54 PM
Hi,
show us your config and tell us what ping is not working.
Regards.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide