cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
76
Views
0
Helpful
5
Replies

Static routing

nagiharmeet94
Beginner
Beginner

here I can't able to get ping from one user end device to another user end device...but able to get ping on router attached on another side 

r1- ip addr 12.0.0.1 fa 0/0 S.M. /8

      ip addr 10.0.0.10 fa 0/1 S.M. /8

      no shut down

command for routing GCM# ip route 20.0.0.0 255.0.0.0 12.0.0.2

R2 - ip addr 12.0.0.2 fa 0/0 S.M. /8

ip addr 20.0.0.10fa 0/1 S.M. /8

no shut down 

command for routing GCM# ip route 10.0.0.0 255.0.0.0 12.0.0.1

pc1 - IP address 10.0.0.1

          Default gateway 10.0.0.10

pc2 - IP address 20.0.0.1

          Default gateway 20.0.0.10

Implementing on real environment

any solution..?

5 REPLIES 5

Predrag Jovic
Participant
Participant

All interfaces are fa 0/0?

:)

If fa0/0 everywhere is a typo, it should be OK as it is configured, as long as show ip interface brief lists all involved interfaces as up up.

If it is some emulator (e.g GNS3 etc) could be some bug, typically it is resolved with closing and opening lab again.

Hi

Are you trying in GNS3 or packet tracert? As it was mentioned previously, it could be a bug, try to use networks /24 instead /8. Your config looks good.




>> Marcar como útil o contestado, si la respuesta resolvió la duda, esto ayuda a futuras consultas de otros miembros de la comunidad. <<

Working on real environment with routers...

ohh ok,

Could you please provide all the config of both devices? and the router model




>> Marcar como útil o contestado, si la respuesta resolvió la duda, esto ayuda a futuras consultas de otros miembros de la comunidad. <<

I got solution 

it was firewall of my laptop was active so cnt able to get msg from outer any link

anyways thnks for ur help

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: