Hello
We have a router with this log message: %SYS-3-LOGGER FLUSHING: System pausing to ensure console debugging output
He's not operationel, cause he block when he boot.
here is the Console and where he block when we reboot it;
System Bootstrap, Version 12.2(17r)S4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2005 by cisco Systems, Inc.
Cat6k-Sup720/RP platform with 524288 Kbytes of main memory
System Bootstrap, Version 8.4(2) Release
Copyright (c) 1994-2005 by cisco Systems, Inc.
Cat6k-Sup720/SP processor with 524288 Kbytes of main memory
Autoboot: failed, BOOT string is empty
Autoboot executing command: "boot "
Initializing ATA monitor library...
string is bootdisk:s72033-ipservicesk9_wan-mz.122-33.SRA2.bin
Loading image, please wait ...
Initializing ATA monitor library...
Self extracting the image... [OK]
Self decompressing the image : ################################################################################################################### [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, s72033_sp Software (s72033_sp-IPSERVICESK9_WAN-M), Version 12.2(33)SRA2, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Thu 30-Nov-06 14:31 by prod_rel_team
Image text-base: 0x401012FC, data-base: 0x41608000
Active crashed three times, disabling auto-boot and dropping to rommon
%Software-forced reload
12:24:40 UTC Sun Jan 3 2016: Breakpoint exception, CPU signal 23, PC = 0x403043C0
--------------------------------------------------------------------
Possible software fault. Upon reccurence, please collect
crashinfo, "show tech" and contact Cisco Technical Support.
--------------------------------------------------------------------
-Traceback= 403043C0 40301FA0 40AD777C 40ADA708 40AC9710 40AC8A54 402A5A18 402A5A04
$0 : 00000000, AT : 41A80000, v0 : 42680000, v1 : 42120000
a0 : 502B673C, a1 : 41A82740, a2 : 41640000, a3 : 41630000
t0 : 402F7C78, t1 : 3400FF01, t2 : 402F7C78, t3 : FFFF00FF
t4 : 402F7C78, t5 : 50C18978, t6 : 00000000, t7 : 50C18970
s0 : 00000000, s1 : 41640000, s2 : 00000000, s3 : 00000000
s4 : 42F50000, s5 : 00000000, s6 : 41450000, s7 : 41450000
t8 : 50C189D0, t9 : 402DF144, k0 : 8300CF60, k1 : 04749E00
gp : 41A80660, sp : 43AED2C8, s8 : 42680000, ra : 40301FA0
EPC : 403043C0, ErrorEPC : 00428897, SREG : 3400FF03
MDLO : 00007530, MDHI : 00000000, BadVaddr : 00000000
Cause 00000024 (Code 0x9): Breakpoint exception
File bootflash:crashinfo_20160103-122440 Device Error :No such device
=== Flushing messages (12:24:40 UTC Sun Jan 3 2016) ===
Buffered messages:
Queued messages:
00:00:05: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
00:00:05: %OIR-6-CONSOLE: Changing console ownership to switch processor
*** System received a Software forced crash ***
signal= 0x17, code= 0x24, context= 0x426811e4
PC = 0x402f7cbc, Cause = 0x1020, Status Reg = 0x34008002
System Bootstrap, Version 8.4(2) Release
Copyright (c) 1994-2005 by cisco Systems, Inc.
Cat6k-Sup720/SP processor with 524288 Kbytes of main memory
rommon 1 > dir bootdisk:
Initializing ATA monitor library...
Directory of bootdisk:
2 83135972 -rw- s72033-ipservicesk9_wan-mz.122-33.SRA2.bin
10151 263112 -rw- crashinfo_20070806-102701
10853 33554432 -rw- sea.log
10184 264467 -rw- crashinfo_20070806-103203
10217 6590 -rw- crashinfo_20140805-084550
10218 5643 -rw- crashinfo_20140805-085809
10219 5643 -rw- crashinfo_20140805-091023
10220 5643 -rw- crashinfo_20140805-092237
10221 5643 -rw- crashinfo_20140805-093443
10222 5643 -rw- crashinfo_20140805-094649
10223 5643 -rw- crashinfo_20140805-095903
rommon 2 > boot bootdisk:s72033-ipservicesk9_wan-mz.122-33.SRA2.bin
Loading image, please wait ...
Initializing ATA monitor library...
Self extracting the image... [OK]
Self decompressing the image : ################################################################################################################### [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, s72033_sp Software (s72033_sp-IPSERVICESK9_WAN-M), Version 12.2(33)SRA2, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Thu 30-Nov-06 14:31 by prod_rel_team
Image text-base: 0x401012FC, data-base: 0x41608000
00:00:04: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
00:00:04: %PFREDUN-6-STANDBY: Initializing as STANDBY processor
Regards
