Greetings All,
A few questions.
1. How many T1 controller errors per second would it take to affect a WAN link communication. (E.g Line code violations, Path code violation, Errored Sec etc.) If my memory serves me well Cisco states that the "errors" have to be 1% of the total traffic traversing the equipment.
2. What does the "no adjacency" drop count of the "show ip traffic" output mean? I could not find any documentation explaning this.
"show ip traffic
IP statistics:
Rcvd: 10525673 total, 55466 local destination
0 format errors, 0 checksum errors, 6 bad hop count
0 unknown protocol, 0 not a gateway
0 security failures, 0 bad options, 0 with options
Opts: 0 end, 0 nop, 0 basic security, 0 loose source route
0 timestamp, 0 extended security, 0 record route
0 stream ID, 0 strict source route, 0 alert, 0 cipso
0 other
Frags: 9 reassembled, 0 timeouts, 0 couldn't reassemble
16 fragmented, 0 couldn't fragment
Bcast: 18141 received, 22 sent
Mcast: 12175 received, 11409 sent
Sent: 38227 generated, 4819269 forwarded
Drop: 3847 encapsulation failed, 0 unresolved, 5655875 no adjacency
227 no route, 47 unicast RPF, 0 forced drop"
