cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
250
Views
0
Helpful
1
Replies
Highlighted
Beginner

X25 RBP MAP with generic DTE Source

Hello!

I have to configure a generic x25 rbp map, how I can do that?

I try this:

 x25 map rbp 0 cud 0x00550055 remote host 10.0.0.1 port 3000

But when I use '0' in DTE source, I have this on debug log:

Feb 9 17:17:36.866: Serial0/0/0: X.25 I R1 Call (17) 8 lci 1
Feb 9 17:17:36.866: From (8): XXXXXXX To (0):
Feb 9 17:17:36.866: Facilities: (0)
Feb 9 17:17:36.866: Call User Data (8): 0x5555555 (unknown)
Feb 9 17:17:36.870: Serial0/0/0: X.25 O R1 Clear (5) 8 lci 1
Feb 9 17:17:36.870: Cause 0, Diag 64 (DTE originated/Call or Clear problem)

Thanks for your help!!

1 REPLY 1
Highlighted
Cisco Employee

Hi Felipe

(config-if)#x25 map rbp ?                                    
  X.121 Addr  Remote host's X.25 address

(config-if)#x25 map rbp

Your config has 0 for x.121 address. Not sure why you have configured 0 here. I looked up our documentation guides and configs but could not find an answer.

Please help me understand what you expected to accomplish by configuring 0 for x.121 address.

Sincerely ... Palani