Hello,
We are struggeling with an ISR 4331 router with NIM-ES2-4 module. The device has its control connections established to the controllers -> everything fine. Now we just want to deploy our prepared device template with our branch site configuration, but all we get is:
bad-cli - Interface GigabitEthernet0/1/0, parser-context - Interface GigabitEthernet0/1/0Error received from the device is :
bad-cli - Interface GigabitEthernet0/1/1, parser-context - Interface GigabitEthernet0/1/1Error received from the device is :
bad-cli - Interface GigabitEthernet0/1/2, parser-context - Interface GigabitEthernet0/1/2Error received from the device is :
bad-cli - Interface GigabitEthernet0/1/3, parser-context - Interface GigabitEthernet0/1/3Error received from the device is :
bad-cli - Vlan internal allocation policy ascending, parser-context - Vlan internal allocation policy ascendingError received from the device is
The mentioned interfaces are related to NIM-ES2-4 module.
We did try to add switchport in the device template like in the picture below, but without success, the error stays the same.
Any advices?
kind regards Danijel
