cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
339
Views
0
Helpful
3
Replies

SD-WAN service VPN OSPF configuration issue

R Manjunatha
Level 3
Level 3

There is no route from B3-Edge 192.168.20.0/24 prefix  after configuring the OSPF...as per the attached configuration.

3 Replies 3

Hi,

 

192.168.20.0/24 is connected route in B3's FIB (preferred over OSPF), thus cannot be redistributed into OMP like OSPF route.

Looks like, you even don't redisribute connected on B3 into OMP, that's why in B1 you don't see it.

 

interface ge0/2
ip address 192.168.20.254/24
no shutdown
!

 

 

HTH,
Please rate and mark as an accepted solution if you have found any of the information provided useful.

still am not clear about this concept...

Actually, this is fundamentals of routing redistribution

HTH,
Please rate and mark as an accepted solution if you have found any of the information provided useful.

Review Cisco Networking for a $25 gift card