01-22-2018 11:30 PM - last edited on 08-20-2019 12:31 PM by dhuckaby
I have a problem in setting up netflow for Cisco Stealthwatch. I've set up the exporter in WLC through GUI, but Stealthwatch didn't show any data. Stealthwatch read the flows from WLC, but no data about the clients. Stealthwatch displayed an error "Exporter has sent invalid template data."
I attached some pictures in this post you guys might want to look at. Any help appreciated. Thank you
Solved! Go to Solution.
11-04-2018 05:26 AM - edited 11-04-2018 05:27 AM
I didn't get this working. After checking some cisco docs, i found that enhanced flow record data export (which is required for Stealthwatch) was added only on WLC 5520, 8510 & 8540. In other words, my WLC 2504 doesn't support the enhanced flow record data export..
04-15-2018 06:47 PM
Did you ever get this working? I'm working on this in my lab. It is my theory that you still need your L3 device to send NetFlow information. I believe the WLC will only send data it is learning from AVC. It isn't a true NetFlow flow like you would get from a L3 switch or a router.
11-04-2018 05:26 AM - edited 11-04-2018 05:27 AM
I didn't get this working. After checking some cisco docs, i found that enhanced flow record data export (which is required for Stealthwatch) was added only on WLC 5520, 8510 & 8540. In other words, my WLC 2504 doesn't support the enhanced flow record data export..
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide