Spports to Configuring IGMP Features, Example shows how to enable the switch to join multicast group 255.2.2.2: Switch(config)# interface gigabitethernet1/0/1 Switch(config-if)# ip igmp join-group 255.2.2.2
When we tried to give the command in "Switch(config-if)# ip igmp join-group 2xx.x.x.x", it is not
accept the command.
give feed back either it supports this command or Not - Give reason if support what we need to do
Dear Expertsi have a currently FMC 750 managing FP 7110 , i want to migrate to FMC 1600 but the migration guide has no documentation to such model becz FM750 replacement is FMC 1000 and currently fmc1000 is also end of sale and replacement is FMC 1600,&nb...
Hi All- I have an ISE 2.7 cluster - two admin nodes and three PSNs. I have an AD External Identity Source that I use for computer based EAP-TLS authentication. We currently have about 10 domain controllers, several of whi...
Hi All,I currently have my ASA configured to authenticate against a RADIUS server for remote access VPN. The RADIUS server is setting the 'Class' attribute with a list of the users groups and I'd like to configure dynamic access policies using this inform...
Can you have a permit command set to allow a help-desk user to shut/no shut a particular interface or a limited range of interfaces on a switch without giving them access to the entire conf t command. What would the cmd and argument look like?