This issue occurs due to the presence of Cisco bug ID CSCeh84997.
While a database replication is performed on a CiscoSecure ACS for Windows or a CiscoSecure ACS Solution Engine, the ACS server or ACS Solution Engine can generate this error in the Database Replication.csv file.
This information is displayed in the CSAuth log file:
CSBackupRestore(OUT) Failed to create output directory C:\Program Files\CiscoSecure ACS v3.3\CSAuth\DbSyncScratch\\RegValues for DLL
The issue occurs when the target folder on the replication slave machine already exists.
In order to resolve this issue on the CiscoSecure ACS for Windows server, browse to C:\Program Files\CiscoSecure ACS v3.3\CSAuth\ (the local drive where the ACS is installed) and delete the DbSyncScratch folder.
In order to resolve this issue on the CiscoSecure ACS Solution Engine, backup the database configuration, re-image the ACS Solution Engine, and then restore the database configuration. This is necessary because there is no access to the Microsoft Windows interface on the CiscoSecure ACS Solution Engine.
HelloCan the ESA/Ironport content filter also filter the recipient in the CC: box?I need to identify all email that are sent to a specific email (ex. firstname.lastname@example.org). So far I can catch/filter them when that address is a regular recipient and/or sen...
Hello,I have created an IPSEC Site to Site tunnel between an ASA 5506 in Singapore and an ASA 5505 in New York.I would like our Singapore network (192.168.192.0 /24) to be able to communicate with two subnets in New York, our internal subnet (192.168.170....
Hi, Can someone please help me figuring out why my Cisco ASA 5508 floating backup default route is active even if the Primary still up? My expected result is I should not be able to ping the Backup IP if the primary still up but what's happening is I...
Hi, I am using a Cisco FP1010 running ASA software. The ASA software on the 1010 runs on top of fxos.I installed 3 software bundles 9.14(1), 9.14(2) and 9.15(1) (using the downgrade disk1:/<image> disk1:/<config>)How can I manage these im...
we've been asked to configure the parameters on Cisco ASA while Azure is on the client's end. sh crypto isakmp shows State : MM_ACTIVE however, when I try the packet-tracer command, Phase 8: VPN state is DROP. Can someone give me an idea wh...