Once all requirements are met, issue these commands on the PIX:
hostnamedomain-name !--- Generate a key for the SSH encryption to use. ca generate rsa key 1024 !--- Allow the desired host to connect to the PIX on the interface specified. sship_address mask interface !--- Save your configuration. ca save all write memory
This is an example:
hostname mypix domain-name cisco.com ca generate rsa key 1024 ssh 10.0.0.0 255.255.255.0 inside ca save all write memory
Occasionally, when a username and password is provided in the SSH client, an SSH window appears and then disappears. In order to resolve this problem, issue the ca zeroize rsa command in order to remove any existing RSA keys on the PIX. Then, issue the ca zeroize rsa command again in order to regenerate the RSA keys.
If the PIX is configured for port forwarding with the static command, for port 22, then the configuration of the SSH to the PIX does not work.
In PIX version 7.0 and later, this is the command needed to generate RSA key:
HiI run an MPLS backbone and try to find a way to implement Cisco GET VPN.For historical reasons, we have MPLS running on the CE devices at the customer site. That means the whole path from the customer site A, through our core till customer site B is MPL...
Have run through the steps on the EVE support site. Sometimes the device gets an IP and the GUI comes up, but will not allow me to login.Sometimes the device does not get an IP at all. I'm running the lab from my PC which is an i7 with 16GB of RAM and a 1...
Hello;I have a CISCO asa 5505 running on 9.2.4(27) and it is working with lots of configurations. I want to downgrade to the recommended version 9.1.7(32) interim. what is the procedure to do this?Can I simply put this version disk o disk0:/ and repl...
I decided to post something that may be useful to others looking at the Single Click Sponsor Portal Functionality in ISE 2.2+. I had a weird issue in our environment where some sponsors were able to use the tokenized single-click link from their ema...
Hello Cisco Community, We recently check in the VPN the communication is not working well.We received these errors: Group = x.x.x.x, IP = x.x.x.x, Rejecting IPSec tunnel: no matching crypto map entry for remote proxy 172.29.180.0/255...