Following the step in the document, I was able to successfully Login to the Guest Wireless using my Facebook credentials. Other than the logo and banner, this is the look of the portal following the instructions:
and it works great. There are a few changes that I would recommend to help avoid confusion. Knowing me, it may just add to the confusion, but that's why comments are enabled!
This places the button at the top of the page. I have also changed the Instructional Text of the Portal to read, "Welcome to the Guest Portal. If you have a Guest Account, simply sign in. If you do not have a guest account you can either Register for an account or login with your Facebook credentials."
Hopefully this alleviates the confusion as to the account that would be created.
I also added a Support Information Page on the Portal Behavior and Flow Settings tab. I replaced that link with a button.
Then, on the Portal Page Customization tab of the portal you are using, scroll to Optional Content 2 and click the Toggle HTML Source button:
Paste in this code for the Register for an Account button and to move it to the top of the page:
Hi all,As I have firewall and L3 switches connected in an infrastructure.Cisco FirePOWER is configured with Global OSPF as VRF is not supported.Cisco Switch is configured both Global and VRF OSPF.Before the following hardening is performed, the routing is...
I'm using the ASA 5516.ASA and ASA are connected on a dedicated line, and two lines in different bands are connected to the ASA interface.I would like to use IPSEC VPN and will use IKE V2.What I'm curious about here is that if Line 1 loses its VPN connect...
Hi All,All the internet traffic that egress from the exit point gets source-natted to the public ip on the interface having the ISP link. Now, if the source-nat on the interface is turned off then many applications stop working or being accessible. There ...
I am having an issue with incoming rules. Here is my running config. : Saved:: Serial Number: JAD21290D2D: Hardware: ASA5506, 4096 MB RAM, CPU Atom C2000 series 1250 MHz, 1 CPU (4 cores):ASA Version 9.8(1)!hostname ciscoasaenable password $sha512$500...