Hello - I just installed OS X 10.9 (Maverick), and my Cisco AnyConnect VPN Client has began acting strange. Prior to the upgrade, the connection was always stable, however after the upgrade it disconnects and reconnectes about every 1-2 minutes continuously. This is an unworkable situtation and wondering if there is something I can change with the configuration to alleviate this issue.
Thanks
Hello Joe,
Unfortunately Anyconnect is not compatible with Maverick (10.9) yet. It's being tracked under CSCuh73010
-Gustavo Medina
It has completely disrupted my offsite work situtation. And this is the only software that I'm having issues with on 10.9.
Why is AnyConnect always behind? There was plenty of time for Cisco to have this prepared ahead of time. I have had issues before when OS X was upgraded. It's unacceptable from such a large company.
Seriously, that's why they have developer releases, so that developers can get their software ready ahead of time. What is Cisco doing during this time?
Thanks for tracking this, i have the same issue. disconnects every 1-2 minutes with 10.9+Anyconnect 3.1
Looking at stats seems that Control Frames are not being received to me during outages.
Worth mention i have the problem within my corporate network, from my home DSL it works ok.
Hello Guys,
The problem has been isolated to a bug in OS X 10.9. We are examining all possible workarounds while we wait for an OS X 10.9 update which fixes this regression.
If you are reaching out to Apple to open your own case, you are welcome to reference our Apple bug report ID: 15261749
-Gustavo Medina
Any solution would be much appreciated, completly breaks my off site working solution.
I can't even connect. I receive an error that says "Posture Assessment Failed: Hostscan Initialize error"
UPDATE
I have been able to get a solid, stable VPN connection using the standalone install package "anyconnect-macosx-i386-3.1.04072-k9.dmg" - when installing, I only installed the VPN module - I did not install the posture module or any of that other stuff. I've had zero problems with it since then. The download files for this version of AnyConnect are available here:
http://software.cisco.com/download/release.html?mdfid=283000185&softwareid=282364313&release=3.1.04072&relind=AVAILABLE&rellifecycle=&reltype=latest
The particular one that worked for me was "Standalone DMG package for Mac OS X "Intel" Platforms"
This document was generated from the following discussion: Mac OS X Maverick - AnyConnect
