Users with Superuser security privileges can configure nodes to use RADIUS authentication.
An ONS node operates as a client of RADIUS. The client passes user information to designated RADIUS servers, and then acts on the response. RADIUS servers receive user connection requests, authenticate the user, and return all configuration information necessary for the client to deliver service to the user.
Create a user on ACS with CiscoSecure PAP password that we will use to login ONS
Assign the above created user 454supper to FullAccessGroup group by going tp Group Setup.
Defining ONS as a Radius client
Login To ACS
Click on Network Configuration.
Click on ADD Entry.
Name the Client hostname unique.
Enter the ip address of the ONS node.
Enter the shared secret key, should be same as Node/ONS config.
Make sure Authenticate Using set to "Radius(CiscoIOS/PIX 6.0)
User Security Group Mapping
The possible security levels are Retrieve, Maintenance, Provisioning, and Superuser.
An attribute-value (AV) pair represents a variable and one of the possible values that the variable can hold. Within ONS, users are mapped to different security groups based on Cisco AV Pair. Here is an example:
"shell:priv-lvl=X" where X can be value of 0 to 3:
0 represents Retrieve
. 1 represents Maintenance
2 represents Provisioning
3 represents Super
Defining RADIUS Server On ONS
Log into Cisco Transport Controller (CTC).
Go to the Network view.
Select a specific ONS in order to go to the Shelf view.
Click Provisioning > Security > RADIUS Server.
Type the IP address of the RADIUS server in the IP Address field.
Type a shared secret in the Shared Secret field. A shared secret is a text string that serves as a password between a RADIUS client and RADIUS server.
Type the RADIUS authentication port number in the Authentication Port field.
The default authentication port number is 1812.
Type the RADIUS accounting port number in the Accounting Port field. The default accounting port number is 1813.
Check ACS logs under reports and activities > failed authentication.
Make sure shared-secret key is same on both the sides.
In order to get rds.log file, set the logging level to full and generate package.cab file.
In some cases even your configuration is correct and you see an extra attribute "aaa:supplicant-name=<username>" in the RDS logs pushing down to ONS then this will cause ONS to fail authorization. In order to fix this go to Interface Configuration > RADIUS (Cisco IOS/PIX 6.x) and uncheck the "Enable Authenticated Port cisco-av-pair" option.
Hi, Try to connect in ssh or https to a cisco asa. We need to manage the firewall by the vpn anyconnect. I'm able to connect to any device in the nertwork but not the firewall. If I try to connect to the management port via vpn I receive t...
Hi, I have an organization which has the roaming client installed on the endpoints, which is being used to protect endpoints remotely from an organization, said organization has another umbrella dashboard in which it is deploying the umbrella branch ...
Hello. We use an ESA for Multi-Tenancy. Is it possible to generate reports per RAT domain ? I'm curious the quantity of mail that went to a specific domain hosted on the ESA, not on the whole appliance. Thanks!
Hello,on an FPR-1010 device (Version FTD 6.6.1), simply managed by FDM, I configured an Anyconnect VPN remote access with certificate based authentication. Cisco support team told me, the only way to configure CRL checking for revoced certificates is the ...
I'm looking at deploying an AC upgrade to our clients, and already have it set up on the ASA using webdeploy, but I'm concerned I wont hit clients that dont use VPN regularly, but who are on the enterprise network.We use Umbrella and I was considering ena...