Hi, I have a 5508 wireless lan controller we have two SSID configured Profile Name : Corporate and Guest When I go look at the Most Recent Traps all I see is Client with Mac address blah has joined your corporate, this goes on for sometime. But I am...
Hi, I have a wireless controller and an ACS 5.3. I would like to create a wireless network where a corporate laptop would use the certificates installed to connect to the wireless and then authentication with AD and laptop certificates to the ACS. So...
Hi,I have aCisco 5508 wireless controllerCisco ACS 5.1LDAP connectionI have setup the wireless controller to do RADUIS authentication with the ACS 5.1 using LDAP. The setup is currently working, Brief info below on setup.I setup the PC client to use ...
Hi, I just wanted some advice last week while our company was doing some refurbishment a hired contractor came in and plugged on ethernet cable from one wall port directly into another wall port. This caused the end of the world till I managed to tra...
Any help on this subject would be greatI can manage to get my account logging into the cisco switch throught the Active Directory setup in external Idenity stores but not my LDAP setup here are some logs from the successful log in and unsuccessful lo...
HiI have this working on ACS 4.2 but I have upgraded to ACS Version : 5.5.0.46 and I am now unable to login. I have configured the rules and ACS logs are showing it's successful but on CTC I get errorEID-2199Login failed on <IP address>Exception = Th...
Yep your on the money, new to the company once you mentioned that I fished around and found the guest anchor.thankyou for pointing me in the right direction
Hi Guys, Well I configured the ACS following Scott's information, and I then tried to connect with the laptop and I got this. Logged At:October 12,2012 2:50:17.866 PMRADIUS Status:Authentication failed : 15039 Selected Authorization Profile is DenyAc...
Hi Scott and George, Thanks very much for this information, I am going to give it a quick go and see how it goes. I have read the MAR doco link you sent Scott and it does seem a few people have issues with the AD and Certificate aspect with EAP TLS....
