Resolution
To resolve this issue, perform these steps:
- VPN 3005 Concentrator has a DB9 connector. Use a straight cable in order to connect the COM1 or serial port on the PC to the console on this device.Cisco supplies the cable with the system.
- Start a terminal emulator (HyperTerminal) on the PC. Configure a connection on COM1 with these port settings:
- 9600 bits per second
- 8 data bits
- no parity
- 1 stop bit
- hardware flow control
- Set the emulator for VT100 emulation, or let the emulator auto-detect the emulation type.
For more information, refer to Password Recovery Procedure for the Cisco VPN 3000 Series and Connecting the Console/PC