I have setup and allowed SSH Access to my ASA5520 device running v8.2.1.
I am pushing this off to my Radius server, a Windows 2008 Server running NPS to authenticate, Groups of Users.
I am getting successfull authentication but my Privilege Level is never set unlike my switches.
I keep finding ref to the Line below as i replacement to the shell:priv-lvl=15 cmd used on Switches, but I can not find how to achieve this.
RADIUS users—Configure the user with Cisco VSA CVPN3000-Privilege-Level with a value between 0 and 15
Does anyone know how to achieve this via Windows 2008 and what the Custom attribute must be ?
Thanks for your help.