01-07-2011 04:57 AM - edited 02-21-2020 04:12 AM
Hi guys,
I've got 2 routers, one is a 878 with an IOS lvl 12.4(15)T4 RE and second is a 1760 with an IOS lvl 12.3(6b).
Even if Cisco documents are tellin me both device is supporting Net Flow, i got troubles implementing it in my system.
I got a doubt about my IOS lvls, and wondering is there a minimum IOS lvl requirement about net flow on these hardware?
Could my problem need an IOS update before resolution?
Any clues will be mostly welcome...
Ozzy
Solved! Go to Solution.
01-10-2011 01:35 PM
Hi,
Are you trying to configure legacy netflow, or flexible netflow? Specifically what's the command you are trying to configure that the router is not taking? Netflow should be supported on all platforms, and you can use the Feature Navigator to verify the minimum release/feature set requirement for the platform and software version you are interested in:
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
Thanks,
Wen
01-10-2011 01:35 PM
Hi,
Are you trying to configure legacy netflow, or flexible netflow? Specifically what's the command you are trying to configure that the router is not taking? Netflow should be supported on all platforms, and you can use the Feature Navigator to verify the minimum release/feature set requirement for the platform and software version you are interested in:
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
Thanks,
Wen
01-10-2011 10:25 PM
Actually i was trying to use a tool calling netflow configurator, and if wasn't supporting to change config via SNMP on my current hardware.
Your links are more than enough for me about which product support which feature, with whatever IOS lvl.. Thanx a lot!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide