cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

ASR9001 initial IOS XR upload

2353
Views
5
Helpful
0
Comments

ASR9001= comes with nosoftware, so we need to do initial IOS XR uplod via tftp

we need to connect serial console, speed 115200, plug LAN to mgmt 0

issue following commands

 
IP_ADDRESS=X.X.X.X
IP_SUBNET_MASK=Z.Z.Z.Z
TFTP_SERVER=X.X.X.Y
TFTP_FILE=asr9k-mini-p.vm-4.2.3 -- initial IOS XR image
TURBOBOOT=on,disk0,format - format disk0
sync
set
boot tftp:

Login/password - root/root

The default username/password, for a spare RSP without the Cisco IOS XR image or a chassis without the Cisco IOS XR image, is set to "root/root".

If we see messages like this

canb-server[150]: %PLATFORM-CANB_SERVER-3-MESSAGE_FAILED : Unexpected CBC message received from slot 0/RSP0/CPU0 [ver 22.113] for msg type 3, id 177, l

we need to do fpd upgrade

RP/0/RSP0/CPU0:ios(admin)#show hw-module fpd location all – see what modules are subject to fpd upgrade
RP/0/RSP0/CPU0:ios(admin)#upgrade hw-module fpd all location all

RP/0/RSP0/CPU0:ios(admin)#hw-module location 0/0/CPU0 reload - reload LC

RP/0/RSP0/CPU0:ios(admin)#show hw-module fpd location all

uploading and installing XR packages

RP/0/RSP0/CPU0:ios#conf t
RP/0/RSP0/CPU0:ios(config)#int mgmtEth 0/RSP0/CPU0/0
RP/0/RSP0/CPU0:ios(config-if)#ipv4 address X.X.X.X/X
RP/0/RSP0/CPU0:ios(config-if)#no sh
RP/0/RSP0/CPU0:ios(config-if)#commit

RP/0/RSP0/CPU0:ios#admin
RP/0/RSP0/CPU0:ios(admin)#install add tar tftp://X.X.X.Y/asr9k-XXX-p-4.2.3

RP/0/RSP0/CPU0:ios(admin)#install activate disk0:asr9k-XXXX-p-4.2.3 - repeat this step for each of XR packages

RP/0/RSP0/CPU0:ios(admin)#install commit

File asr9k-XXX-p-4.2.3

is .tar-archive which consist of xr packages:
asr9k-doc-p.pie-4.2.3
asr9k-mcast-p.pie-4.2.3
asr9k-mgbl-p.pie-4.2.3
asr9k-mpls-p.pie-4.2.3
asr9k-services-p.pie-4.2.3

If you need other packages, please update this list accordingly

Content for Community-Ad

This widget could not be displayed.