The Cisco IOS XRv 9000 router implements the feature set of Cisco IOS XR software. Running on virtualized general x86 compute platforms, it complements existing physical Cisco router platforms that rely on Cisco IOS XR software, such as Cisco Network Convergence System routers, Cisco ASR 9000 Series routers, and Cisco Carrier Routing System (CRS) platforms. Now, service providers can enhance their operational excellence and offerings based on physical routers and easily move them to a virtual form factor. The Cisco IOS XRv 9000 router offers greater agility, improved network efficiency, lower capital and operational expenditures, and the ability to efficiently scale network capacity up and down, based on demand. This lab demonstrates how to install the IOS XRv 9000 in a VMware ESXi environment.
Scenario 1: Install IOS XRv in VMware ESXi Environment
Scenario 2: Verify Configuration
PC Workstation at 198.18.133.252
Includes VMware vCenter Client
VMware ESXi 6.0
Virtualized instance of IOS XR
Zero-touch provisioning functionality
Provides an environment to run chef, native applications, and container applications
Hi,Previous we were using Cisco 7606 as BRAS and the issue was Router keeps on rebooted automatically.OLD Details about Cisco 7606Router 7606 #show versionCisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVENTERPRISEK9-M), Version 15.2(2)S...
I have successfully registered my SIP endpoints (which we have developed) with Broadsoft sandbox environment. I can make basic calls without problems. When I try to conduct feature tests like Call Waiting (CW), Call Hold (CH), and Call Transfer (CT)...
I am trying to find if there is any Pros or Cons in deploying MPLS with separate customer AS for each site as opposed to one AS. The end goal is to be able to inject default routes from two DCs and be able to make a subset of sites follow one default rout...
So I have attempted the below config: l2vpn
backup disable never
xconnect group Xconns
In one of the discuss, it was initiated to us that there is a specific DB size for example:1 GB and breaching of which will led to crash of Iedge process.I want to replicate the scenario by creating load of user by tool in the lab and track the CDM db uti...