The Cisco WAN Automation Engine (WAE) is a powerful, flexible, software-defined networking (SDN) platform. It abstracts and simplifies your WAN environment while making it fully open and programmable. WAE network-modeling technology enables real-time analysis of traffic needs and traffic placement in complex WAN topologies.
This is a sandbox intended for self-study, and it provides a variety of scenarios that interact with numerous components of WAE. You will interact with the WAE platform across a set of APIs and technologies, including Cisco Network Services Orchestrator (NSO), Segment Routing, MPLS, PCEP, and BGP-LS.
This environment uses Virtual Internet Routing Lab (VIRL). VIRL is a multi-purpose network virtualization platform that provides an easy way to build, configure, and test new or existing network topologies with an intuitive user interface (UI).
Scenario 1: Access WAE Lab
● Cisco AnyConnect®
Cisco WAE 7.1.1
IOS XRv 6.4.1
Virtual Internet Routing Lab (VIRL)
Model-driven path visibility and computation engine
Simulates and optimizes paths in a network
Bandwidth related use cases with WAE as an application integrated with XTC – Bandwidth Optimization and Bandwidth on Demand
A stateful, distributed path computation engine running in IOS XR
Service Orchestrator for provisioning/deploying service and configurations to devices
Using NSO to deploy an local explicit SR policy and query WAE for an optimal path before deployment
Using NSO to deploy a local SR policy with Bandwidth constraint
Multi-purpose network virtualization platform.
Provides an easy way to build, configure, and test new or existing network topologies
can anyone suggest me the best method of NAT on PE ASBR router before sending the customer traffic to any CSP if CSP is advising that they only receive public IP. I have a solution but some discrepancies are there. like when the customer is using any...
Looking for assistance in getting XRv 9000 operational on ESXi 6.5 I have tried different versions and feature sets of XRv 9000 version 6.5.3, to include the .ova and .iso.VRR, with VGA, non-VRR. Although the Cisco CSR 1000v installs without issues a...
Hi, We are facing issue with ASR 9904 line card. After power on line card status led is amber only and showing below errorRP/0/RSP0/CPU0:mes-ngl-pbx-pbx-cdi-1#0/RSP0/ADMIN0:Sep 19 15:14:28.524 UTC: canbus_driver: %PLATFORM-CANB_SERVER-3-ALARM_I...
How can I learn about ASR9K MPLS Label limits(LIB and LFIB max numbers).Is there any command to check on the device?
Are these limits changing with LCs and RSPs types.Is there any scaling document to get these values?
I want to learn about to 'Partially-programmed' errors at the output of command 'show l2vpn bridge-domain summary'. I can not find any related document about this part and how to troubleshoot if it is not equal to zero.
I am looking for...