Port Channel in SDA

[aashfaque]

Good Day,

I am having two switches in cluster as control plane node in my SDA and two switches as access nodes. Client want to want to add servers to CP (they call this as core switches too) with LACP.  

SDA is campus base solution so can we add server to CP switch in LACP mannger, please help.

BR, 

[Flavio Miranda]

Hi @aashfaque 

 If you look at the CVD for SDA this topology is not there and this means you will not be able to do this using standard DNAC day-0 templates.  But, dont forget that despite being in Fabric, the switch is a switch and the IOS is there in the same way.

 You can at any time connect to the switch and do the config you want. Or you can build CLI templace on the DNAC and apply to the switch.

One point that needs to be clear, by taking this path, if you get some unkwon issue and need to call TAC, they will not recommend you to move forward, that´s for sure.