04-13-2021 04:18 PM
Hello community,
We are migrating a campus from an existing MPLS campus with PE routers at each distribution block in the network. The original migration strategy was to acquire new hardware as intermediate nodes to be installed in the same location as the existing MPLS distribution switches. The plan was to move building by building from the old MPLS distribution switch to the new SD-Access intermediate switch. This is very expensive (running up two parallel networks with identical hardware side-by-side).
The existing switches are high-end and compatible as SD-Access underlay switches. The idea has been floated to reutilise the existing MPLS switches as SD-Access intermediate nodes, thereby reducing the amount of hardware required while running the old network transport and new SD-Access underlay.
The underlay routing protocol will not change (currently OSPF, will be OSPF in SD-Access underlay). As far as I'm aware, if we can get GRT layer 3 connectivity around the underlay, a GRT default route through the border and adjust the MTU for jumbo frames, we should have what we need for SD-Access to function in parallel to MPLS. I've got a simple image of the proposed migration below:
If you have any input or warnings, please advise!
Josh
04-13-2021 05:22 PM - edited 04-13-2021 07:37 PM
Hi Josh. Good creativity! Sounds like it should be fine. I do have one or two slides directly and also tangentially discussing Cisco SD-Access over an existing IP Core (MPLS in your case). Please check BRKENS-3822. Also if you have access to the latest Cisco Live 2021 on demand content there are a few small updates in BRKENS-2008 - 2008 presentation is paid content until July 2021. URLs below. Cheers! Jerome
https://www.ciscolive.com/global/on-demand-library.html?search=brkens-3822#/
04-14-2021 07:55 PM
Thanks Jerome. We are going to lab this to see if we hit any gotchas, but so far the theory stands up. I will add to this post with any success or failure for future reference.
Josh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide