07-08-2020 07:45 PM
Hi all,
I found out that there is a limit of 200ms of RTT from DNAC to Edge. So, in the case of a branch where that I have a satellite hop, like a VSAT, it is not possible to configure SD-ACCESS for the LAN? I was thinking of using SD-WAN as transit, but the delay is stopper. Any way to solve it or should I go with traditional LAN approach?
Thanks!
07-10-2020 10:31 AM
Hi,
Correction, it's actually 100msec RTT between DNAC and Fabric nodes and it recommended to be with those limits for smoother device administration.. Latency beyond 200ms RTT is not recommended at all.. This is agnostic of Transit type..
Hope this helps..
07-10-2020 12:10 PM
Hi,
Thanks a lot for the answer. So there is no way to use SD-ACCESS through VSAT links? Any plans to support more delay in the connections?
Thanks,
Nacho.
07-23-2020 10:18 AM
Hi Nacho,
No Committed plans as of now.. So would recommend to be within those limits..
Regards
Mahesh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide