We,re going to implement Cisco SD-Access solution in our LAN block. But the problem is all clients in the LAN has thin clients and Use VDI for access to their Desktops. how we can encapsulate their data plane frame into VXLAN to support SGT & VNI?
Some documents indicates to VMware NSX (for VXLAN support) & Nesxus 1000V but unfortunately VMware is announcing the End of Availability (EOA) for the Cisco Nexus 1000V SKU and its associated support SKUs from VMware effective February 2, 2015.
I am assuming that you do not have ACI in your data center based on your concern. Your VDI solution sits outside of the fabric correct? If so, have you considered utilizing an SXP connection to your NAD/s that terminate your L3 SVIs for the VDI solution to essentially push static IP-to-SGT mappings from ISE? Note that this would require you to enable CTS on the legacy gear. IMO this could allow you to rely on some sort of CTS related policy access via SGTs between the VDI desktops and SDA-based thin clients. However, I may be missing information. This is a rather interesting question so I am curious to see what others think/share as well. Anyways, HTH!
Tnx for your reply, BTW, We didn't have implement ACI yet, but we want use ACI fabric for our datacenter in parallel to SD-Access fabric in our LAN block. I,m wondering that our vdi solution can be inside the fabric with nsx or anything, or we must just use our thin clients inside the fabric instead of VDI solution.
If we just use thin clients inside the fabric for connecting to VDI, what features of SD-Access solution we will miss?
Hi Everyone,I have 2 queries1. After we configure the IPSec VPN in a Cisco Router, how do we identify and check that the traffic is flowing through the tunnel? Are there any commands and ways to find it out?2. What are some of t...
Cisco Champion Radio · S7|E29 Increase Visibility and Enhance Security with Cisco AI Endpoint Analytics
Cisco is on a journey to making networking smarter with artificial intelligence and machine learning. The latest stop in this journey, Cisco AI...
Community Live video- Introduction to Smart Licensing on Catalyst Switches
(Live event - formerly known as Webcast- Thursday 30 July, 2020 at 10 am Pacific/ 1 pm Eastern / 7 pm Paris)
This event had place on Thursday 30th, July 2020 at 10hrs PDT&nb...
To participate in this event, please use the button to ask your questions
This topic is a chance to clarify your questions about smart licensing on Cisco Catalyst switches, including 9000 (9200, 93...