Hello,
we have cisco MDS 9148 FC SAN switch and we need to upgrade it to the latest version, can someone please send me the procedure for how to ?
down here is the output of the --> [show version] comamnd
SWITCH1# show version
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_series_home.html
Copyright (c) 2002-2013, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.
Software
BIOS: version 1.0.19
loader: version N/A
kickstart: version 6.2(3)
system: version 6.2(3)
BIOS compile time: 02/01/10
kickstart image file is: bootflash:///m9100-s3ek9-kickstart-mz.6.2.3.bin
kickstart compile time: 7/10/2013 2:00:00 [07/31/2013 10:05:08]
system image file is: bootflash:///m9100-s3ek9-mz.6.2.3.bin
system compile time: 7/10/2013 2:00:00 [07/31/2013 11:15:29]
Hardware
cisco MDS 9148 FC (1 Slot) Chassis ("1/2/4/8 Gbps FC/Supervisor-3")
Motorola, e500v2 with 1036300 kB of memory.
Processor Board ID JAF1522DFHC
Device name: SWITCH1
bootflash: 1023120 kB
Kernel uptime is 2557 day(s), 20 hour(s), 54 minute(s), 9 second(s)
Last reset at 303118 usecs after Tue Dec 9 11:24:18 2014
Reason: Reset due to upgrade
System version: 5.2(8d)
Service:
