cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1986
Views
0
Helpful
1
Replies

Copy running-config startup-config fails

nissanstorage
Level 1
Level 1

Hi

whenever we try to save the running config to the startup configuration it is failing both from GUI and CLI.

This is the error we are getting..

XYZ# copy running-config startup-config

2013 Nov 21 13:08:46 XYZ %ZONE-2-ZS_INIT_FAILED: Failed to save persistent configuration

2013 Nov 21 13:08:46 XYZ %ZONE-2-ZS_INIT_FAILED: pss_create failure, code = 0x80480011, URL = sync:/mnt/pss/zone_zs_active_zset_cfg

[########################################] 100%

2013 Nov 21 13:08:47 XYZ %SYSMGR-2-CFGWRITE_ABORTED: Configuration copy aborted.

Configuration update aborted: request was aborted

Any suggestions ?

1 Reply 1

jihicks
Cisco Employee
Cisco Employee

Hi Hitesh,

The first thing to check is to determine if compact flash is mounted in ready only mode.

Please see the release note of  CSCeg75552 - EXT3-fs filesystem problem due to transient CompactFlash failure.

Best regards,

Jim

Review Cisco Networking for a $25 gift card