General question on LDAP setup/configuration on MDS 9513 Ficon and Fibre Channel switches with NX-OS Version 5.2(2) and 4.2(7b).

[Dave_Jaggernath]

Hi,

I'm trying to setup the LDAP Server but not having much success. .

I took some screen snapshot from our MDS 9513 Ficon Directors and MDS 9513 Fibre Channel Directors (below), the first entry below is our MDS 9513 Ficon Directors used by our Mainframe/Host environment and the second entry is our MDS 9513 Fibre Channel (PPRC) switches:

Cisco NX-OS(tm) m9500, Software (m9500-sf2ek9-mz), Version 5.2(2), RELEASE SOFTWARE Copyright (c) 2002-2011 by Cisco Systems, Inc. Compiled 12/30/2011 14:00:00

Cisco NX-OS(tm) m9500, Software (m9500-sf2ek9-mz), Version 4.2(7b), RELEASE SOFTWARE Copyright (c) 2002-2009 by Cisco Systems, Inc. Compiled 8/16/2010 13:00:00

When I tried to setup/configure the LDAP server on either our MDS 9513 Ficon Directors or MDS 9513 Fibre Channel switch via logon with Admin and then select > Security, followed by AAA and I do NOT see the LDAP selection ????

Any assistance would be very much appreciated, what is missing or are we not at the appropriate software/firmware level for LDAP support.

Thank you.

also, my e-mail address is:  dave.jaggernath@td.com

[Walter Dey]

Has been covered in

https://supportforums.cisco.com/discussion/12569846/general-questions-ldap-setupconfiguration-using-device-manager-version-522-and

[Dave_Jaggernath]

Hi Walter, sorry I'm unable to view or get to your updates.