08-18-2015 02:55 AM
Hi, I'm new to cisco so this may be the wrong forum.
However, I'd like to locate which switch an HBA/wwpn is plugged in on a CISCO San.
I can do this easily on a Brocade SAN using 'nodefind' combined with 'fabricshow'
Does anyone know the CLI commands to achieve this?
thanks Rob
Solved! Go to Solution.
08-18-2015 05:32 AM
Both MDS and N5k provide "show flogi database" and "show fcns database" commands.
This should show you were devices are flogi'd in.
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/4_1/configuration/guides/cli_4_1/clibook/flgi.html
08-18-2015 05:32 AM
Both MDS and N5k provide "show flogi database" and "show fcns database" commands.
This should show you were devices are flogi'd in.
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/4_1/configuration/guides/cli_4_1/clibook/flgi.html
08-18-2015 07:23 AM
Marcin, thanks I was unaware of the 'show fcns' command - worked perfectly.
thanks Rob
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: