10-09-2024 11:34 AM
Hi community,
I need to replace intake for port side exhaust on a pair of switches. I can powered off them. We are receiving PSU's port side exhaust and FAN's port side exhaust.
Is there any procedure for doing this?
Regards,
Solved! Go to Solution.
10-09-2024 10:23 PM
- FYI : https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/hw/9132t/cisco_mds9132T_hardware_install_guide/overview.html#concept_03598C3DCDE748CEA09FEAC644D71E63
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/hw/9132t/cisco_mds9132T_hardware_install_guide/overview.html#concept_B017DF7E9E97466CB8A45FF361196E1E
M.
10-09-2024 10:23 PM
- FYI : https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/hw/9132t/cisco_mds9132T_hardware_install_guide/overview.html#concept_03598C3DCDE748CEA09FEAC644D71E63
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/hw/9132t/cisco_mds9132T_hardware_install_guide/overview.html#concept_B017DF7E9E97466CB8A45FF361196E1E
M.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide