06-08-2012 12:32 AM
Customer production enviroment is nessus 5000 use 1 G interface * 4 and config Port-channel ( LACP ) uplink to C3560 , The port channel link is 802.1q trunk , but Data trsnsfer is low , the sh interface display as follow :
someone can help me why transfer performance pool and how to fix
N-5548UP# sh int ethernet 1/30
Ethernet1/30 is up
Hardware: 1000/10000 Ethernet, address: 547f.ee14.ed25 (bia 547f.ee14.ed25)
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA
Port mode is trunk
full-duplex, 1000 Mb/s, media type is 10G
Beacon is turned off
Input flow-control is off, output flow-control is off
Rate mode is dedicated
Switchport monitor is off
EtherType is 0x8100
Last link flapped 9week(s) 6day(s)
Last clearing of "show interface" counters 20w2d
30 seconds input rate 152 bits/sec, 19 bytes/sec, 0 packets/sec
30 seconds output rate 1440 bits/sec, 180 bytes/sec, 1 packets/sec
Load-Interval #2: 5 minute (300 seconds)
input rate 80 bps, 0 pps; output rate 752 bps, 0 pps
RX
23530565 unicast packets 1591454 multicast packets 393730 broadcast packets
25515749 input packets 15800394415 bytes
8504065 jumbo packets 0 storm suppression bytes
1491713 runts 0 giants 291 CRC 0 no buffer
1492004 input error 0 short frame 0 overrun 0 underrun 0 ignored
0 watchdog 0 bad etype drop 0 bad proto drop 0 if down drop
0 input with dribble 0 input discard
0 Rx pause
TX
459711694 unicast packets 1292248 multicast packets 163261 broadcast packets
461167203 output packets 61814266750 bytes
399778 jumbo packets
0 output errors 0 collision 0 deferred 0 late collision
0 lost carrier 0 no carrier 0 babble
0 Tx pause
1 interface resets
N-5548UP# sh int ethernet 1/30 counters detailed
Ethernet1/30
Rx Packets: 25515750
Rx Unicast Packets: 23530565
Rx Multicast Packets: 1591454
Rx Broadcast Packets: 393731
Rx Jumbo Packets: 8504065
Rx Bytes: 15800394483
Rx Packets from 0 to 64 bytes: 1491755
Rx Packets from 65 to 127 bytes: 7903129
Rx Packets from 128 to 255 bytes: 5915278
Rx Packets from 256 to 511 bytes: 1004624
Rx Packets from 512 to 1023 bytes: 290545
Rx Packets from 1024 to 1518 bytes: 406354
Rx Trunk Packets: 23924310
Tx Packets: 461167235
Tx Unicast Packets: 459711724
Tx Multicast Packets: 1292250
Tx Broadcast Packets: 163261
Tx Jumbo Packets: 399778
Tx Bytes: 61814270196
Tx Packets from 0 to 64 bytes: 315
Tx Packets from 65 to 127 bytes: 354626277
Tx Packets from 128 to 255 bytes: 2688006
Tx Packets from 256 to 511 bytes: 100485581
Tx Packets from 512 to 1023 bytes: 1096685
Tx Packets from 1024 to 1518 bytes: 1870593
Tx Trunk Packets: 460868937
Runt Errors: 1491713
Input CRC Errors: 291
Input Errors: 1492004
06-08-2012 05:32 AM
clearly the input errors/runts on the interface on e1/30 could be playing a part in performance degradation. We need to resolve them first. What do you see for 'show interface' for the port on 3560 going to e1/30 on n5k ? Any output errors? Can you please paste that output as well ? Also how about other interfaces in the same port channel on n5k? Are they showing similar errors or just this one ?
Vin.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide